info@histeel.co.in
+91 89583 90189
Hi-Steel Suspended Grid System is made of roll-formed hot-dipped Galvanized Steel of 0.30mm thickness with zinc coating of not less than 120g/m2 and a minimum tensile strength of 240 mpa.
To fit 600mm x 600 mm or 600 mm x 1200 mm ceiling module.
Main Tee shall be in 38mm/33mm height exposed portion (polyester coated) shall be 24mm.
Cross Tee shall be 26mm in height and expose portion is 24 mm.Wall angles are 24mm height x 24mm expose portion made of 0.40mm thick pre-coated coil.
It is economical and easy to install, using limited labor to complete the installation in the time as compared with the conventional extruded Aluminum Tee Systems. Interchangeability of Main and Cross Tees between systems promotes lower inventory requirements and tremendous field flexibility.
The straight entry locking features of the section allows the system to be installed easily within proximity of the overheads.
The system promotes complete designs flexibility and it is capable of sustaining loads normally designed into Suspended Tee System refer to load table) overlap type of Cross Tee provides a complete flush joint, eliminating gaps between the main runner and Cross Tees and ensuring rigidity at fixtures. In-line cross tees provide true double-lock action.
.png){kind=icon}
